BlueRobotics Lumen Subsea Light v3 for ROV/AUV

Save £7.68
BlueRoboticsSKU: RB-Blu-203
Manufacturer #: LUMEN-LIGHT-R4-RP

Price  :
Sale price £145.92 Regular price £153.60

Tax included Shipping calculated at checkout

Stock  :
Only 1 unit left

Payments and Security

Apple Pay Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • BlueRobotics Lumen Subsea Light v3 for ROV/AUV
  • 1500 Lumen Subsea LED Light
  • Using a high-efficiency Cree XLamp MK-R LED
  • Fully dimmable control using a PWM servo signal
  • Compatible with Arduino, Raspberry Pi, and PixHawk boards
  • Depth Rating: 500m / Input: 7-48 V

The BlueRobotics Lumen Subsea Light v3 for ROV/AUV is a blindingly bright LED light for use on ROVs, AUVs, and other subsea lighting applications. Using a high-efficiency Cree XLamp MK-R LED, the light outputs over 1500 lumens at 15 Watts, brighter than most car headlights!

It has a 135-degree beam angle for wide illumination in front of an ROV. The color temperature is 6200K, similar to most dive lights and ROV lights.

BlueRobotics Lumen Subsea Light v3 for ROV/AUV - Click to Enlarge

In addition to really high brightness, the Lumen R2 is designed for very low brightness output, which is important to be able to illuminate the scene without washing out the colors or brightness. An exponential brightness curve makes it intuitive to use effectively.

It’s housed in a rugged hard-anodized aluminum enclosure with two cable penetrators at the rear, allowing it to go to a depth of 500 m. By default, the second cable penetrator is blank, but the light comes with a second penetrator to allow a second light to be connected to the first (daisy-chaining).

BlueRobotics Lumen Subsea Light v3 for ROV/AUV - Click to Enlarge

The specially designed injection molded acrylic lens ensures a consistent beam angle in both air and water. The case has a built-in mounting bracket with two M3 threaded holes for mounting to your vehicle. The light operates on 10-48 V inputs and can accept PWM signals from 3-48 V.

It is compatible with many common boards like the Arduino, Raspberry Pi, and PixHawk. The case warms up to a comfortable 55 °C (131 °F) when operated in air and stays much cooler in water.

  • 1x Lumen Subsea Light with Cable Penetrator
  • 1x Cable Penetrator Nut
  • 1x Cable Penetrator O-ring
  • 2x Stainless steel M3 mounting screw

BlueRobotics Lumen Subsea Light v3 for ROV/AUV - Click to Enlarge

Size

  • Overall Length: 78.4 mm / 3.09 inch
  • Overall Diameter: 37 mm / 1.46 inch

Electrical

  • Supply Voltage (Vin): 7 - 48 volts
  • Full Brightness Supply Voltage (Vin): 10 - 48 volts
  • PWM Logic Voltage: 3 - 48 volts
  • Peak Current: 15 / Vin amps

Light

  • Maximum Brightness: 1,500 lumens
  • Color Temperature: 6,200 kelvin

Cable

  • Cable Diameter: 4.3 mm, 0.17 inch
  • Cable Length: 0.7 m, 27.5 inch
  • Cable Jacket: Black Urethane
  • Conductor Insulation: Polypropylene
  • Conductor Gauge: 22 AWG

Physical

  • Pressure Rating: 500 m, 1640 ft
  • Bracket Mounting Hole Spacing: 19 mm, 0.75 inch
  • Bracket Screw Size: M3
  • Weight in Air (w/ 1m cable): 118 g, 4.16 oz
  • Weight in Water (w/ 1m cable): 50 g, 1.76 oz
  • Maximum Temperature when Run in Air: 55 °C, 130 °F
  • Beam Angle: 135 degrees in water
  • Wires: Black - Ground, Red - Power, Yellow - Signal

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like