Digilent Arty Z7-10 Zynq-7000 SoC Development Board

DigilentSKU: RB-Dig-316
Manufacturer #: 410-346-10

Price  :
Sale price £251.63

Tax included Shipping calculated at checkout

Stock  :

Re-stocking soon See due date

Notify me when this product is in stock

Payments and Security

Apple Pay Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • Arty Z7-10: Zynq-7000 SoC Development Board w/ Dual-Core Cortex-A9 Processor
  • Integrates software programmability of an ARM-based processor with hardware programmability of an FPGA
  • Fully supported by Xilinx's Vivado Design Suite and SDSoC Development Environment
  • Features high-bandwidth peripheral controllers and low-bandwidth peripheral controller
  • Includes HDMI ports, mono audio output, push-buttons, slide switches, LEDs, and expansion connectors

The Digilent Arty Z7-10 Zynq-7000 SoC Development Board is a comprehensive development platform, meticulously designed around the Xilinx Zynq-7000 System-on-a-chip (SoC) family. This family of SoCs integrates the software programmability of an ARM-based processor with the hardware programmability of an FPGA, thus enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device.

The Arty Z7 is fully supported by Xilinx's Vivado Design Suite, including the complimentary WebPACK version. The SDSoC Development Environment provides a familiar embedded C++/OpenCL application development experience for heterogeneous Zynq SoC deployment.

The Arty Z7 comes in two variants: The Arty Z7-10, which features the XC7Z010-1CLG400C, and the Arty Z7-20, which features the larger XC7Z020-1CLG400C. For applications that do not require the processing system of an SoC, the Arty A7, or Arty S7 may be more suitable options.

The Arty Z7 boasts a 650MHz dual-core Cortex-A9 processor, DDR3 memory controller with 8 DMA channels, and 4 High Performance AXI3 Slave ports. It also includes high-bandwidth peripheral controllers such as 1G Ethernet, USB 2.0, and SDIO, and low-bandwidth peripheral controllers like SPI, UART, CAN, and I2C. The device is programmable from JTAG, Quad-SPI flash, and microSD card. It also features 512 MB DDR3 with a 16-bit bus @ 525 MHz (1050 MT/s), 16MB Quad-SPI Flash with factory-programmed 48-bit globally unique EUI-48/64 compatible identifier, and a microSD slot.

The board can be powered by USB or any 7V-15V external power source. It features Gigabit Ethernet PHY, USB-JTAG Programming circuitry, USB-UART bridge, USB OTG PHY (supports host only), HDMI sink port (input), HDMI source port (output), PWM driven mono audio output with 3.5mm jack, 4 push-buttons, 2 slide switches, 4 LEDs, 2 RGB LEDs, two standard Pmod ports, 16 Total FPGA I/O, Arduino/chipKIT Shield connector, up to 49 FPGA Digital I/O for the Z7-20 and 26 FPGA Digital I/O for the Z7-10, 6 Single-ended 0-3.3V Analog inputs to XADC, and 4 Differential 0-1.0V Analog inputs to XADC.

  • 1x Arty Z7-10: SoC Development Board
  • 1x Digilent cardboard packaging with protective foam
  • 1x USB A to Micro-B cable
  • Arty Z7-10:
    • FPGA part XC7Z010-1CLG400C
    • Logic Cells 28,000
    • DSP Slices 80
    • Block RAM (Mbits) 2.1
  • ZYNQ Processor: 650MHz dual-core Cortex-A9 processor
    • DDR3 memory controller with 8 DMA channels and 4 High-Performance AXI3 Slave ports
    • High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
    • Low-bandwidth peripheral controller: SPI, UART, CAN, I2C
  • Memory:
    • 512 MB DDR3 with a 16-bit bus @ 525 MHz (1050 MT/s)
    • 16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48/64™ compatible identifier
  • Power:
    • Powered from USB or any 7V-15V external power source
  • USB and Ethernet
    • Gigabit Ethernet PHY
    • USB-JTAG Programming circuitry
    • USB-UART bridge
    • USB OTG PHY (supports host only);
  • Audio and Video:
    • HDMI sink port (input)
    • HDMI source port (output)
    • PWM driven mono audio output with 3.5mm jack
  • Switches, Push-buttons, and LEDs: 4 push-buttons
    • 2 slide switches
    • 4 LEDs
    • 2 RGB LEDs
  • Expansion Connectors:
    • Two standard Pmod ports
      • 16 Total FPGA I/O
  • Arduino/chipKIT Shield connector
    • Up to 26 FPGA Digital I/O
    • 6 Single-ended 0-3.3V Analog inputs to XADC
    • 4 Differential 0-1.0V Analog inputs to XADC

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like