ServoCity Stingray-2 Servo Gearbox (0.34 Sec/60°, 30rpm, 700 Oz-in Torque, 900° Rotation)

ServoCitySKU: RB-Sct-2001
Manufacturer #: 3215-0001-0002

Price  :
Sale price £124.79

Tax included Shipping calculated at checkout

On Demand See due date

This is an On Demand item and is not normally stocked. We will order it for you along with our next purchase from the supplier.

* Delays depend on the order frequency from each supplier and the approximate arrival date is indicated in the due date. Returns are not accepted on On Demand and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Payments and Security

Apple Pay Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • ServoCity Stingray-2 Servo Gearbox (0.34 Sec/60°, 30rpm, 700 Oz-in Torque, 900° Rotation)
  • Features 700 oz-in stall torque
  • Offers 900° maximum rotation
  • Allows versatile mounting options
  • Supports both feedback and continuous modes
  • Compatible with R/C and microcontrollers

The ServoCity Stingray-2 Servo Gearbox (0.34 Sec/60°, 30rpm, 700 Oz-in Torque, 900° Rotation) is powered by the goBILDA® 5-Turn Torque Servo, featuring a 2:1 external gear ratio that enhances torque and precision while reducing the range. This gearbox is fully assembled and ready for installation, with the servo mounted to isolate the load to a steel hub-shaft supported by ball bearings, thus protecting the servo from axial loads. The gearbox offers versatile mounting options with M4 threaded holes compatible with the goBILDA® system, and the hub allows for direct fastening to the aluminum output gear. The 8mm REX bore of the hub-shaft can accommodate an 8mm REX shaft or serve as a wire pass-through. The control signal remains identical to a standard servo, allowing it to connect seamlessly to an R/C receiver, Arduino, Raspberry Pi, or REV controller. The servo is FTC legal as it remains unmodified. Available in both feedback and continuous modes, the gearbox can switch between modes using a 3102-0001 servo programmer, thanks to the dual-mode capability of the goBILDA® 5-Turn Torque Servo.

Stingray-2 Servo Gearbox with Torque and Rotation

  • 1x ServoCity Stingray-2 Servo Gearbox (0.34 Sec/60°, 30rpm, 700 Oz-in Torque, 900° Rotation)
  • Gear ratio: 2:1
  • Voltage range: 4.8-7.4V
  • No-load speed at 4.8V: 0.50 sec/60° (20 RPM)
  • No-load speed at 6.0V: 0.40 sec/60° (25 RPM)
  • No-load speed at 7.4V: 0.32 sec/60° (30 RPM)
  • Stall torque at 4.8V: 480 oz-in (34.6 kg.cm)
  • Stall torque at 6.0V: 600 oz-in (43.2 kg.cm)
  • Stall torque at 7.4V: 700 oz-in (50.4 kg.cm)
  • No-load current at 4.8V: 150mA
  • No-load current at 6V: 160mA
  • No-load current at 7.4V: 200mA
  • Stall current at 4.8V: 2000mA
  • Stall current at 6V: 2500mA
  • Stall current at 7.4V: 3000mA
  • Motor type: Brushed DC
  • Direction with increasing PWM signal: Counterclockwise
  • Maximum PWM range: 500-2500µsec
  • Travel per µsec: 0.45°/µsec
  • Maximum rotation: 900° (2.5 turns)
  • Pulse amplitude: 3-5V
  • Deadband width: 4µsec
  • Wire length: 300mm
  • Wire gauge: 22AWG
  • Connector type: 3-Position TJC8 Servo Connector [MH-FC]
  • Intellectual property: Patented

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like