SparkFun Dualband L1/L5 GNSS Breakout - DAN-F10N

Sparkfun ElectronicsSKU: RB-Spa-2647
Manufacturer #: GPS-28435

Price  :
Sale price £55.34

Tax included Shipping calculated at checkout.

On Demand See due date

This is an On Demand item and is not normally stocked. We will order it for you along with our next purchase from the supplier.

* Delays depend on the order frequency from each supplier and the approximate arrival date is indicated in the due date. Returns are not accepted on On Demand and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Description

  • SparkFun Dualband L1/L5 GNSS Breakout - DAN-F10N
  • Engineers around robust u-blox F10 engine
  • Facilitates L1/L5 frequency bands reception
  • Equipped with a dual-band patch antenna
  • Supports AssistNow A-GNSS for enhanced use
  • Tracks with meter-level positional accuracy

The SparkFun Dualband L1/L5 GNSS Breakout - DAN-F10N is engineered around the robust u-blox F10 engine, facilitating the simultaneous reception of L1 and L5 frequency bands. This advanced board employs u-blox's sophisticated multipath mitigation technology to isolate the most potent signals, ensuring dependable, meter-level positional accuracy even in challenging urban environments.

The device is equipped with a compact, integrated Right-Hand Circular Polarized dual-band patch antenna, measuring 20mm x 20mm x 8mm, and includes an onboard switch for connecting an external dual-band antenna. It is fully compatible with the u-blox u-center-2 software and supports AssistNow A-GNSS services, enhancing its functionality and ease of use.

SparkFun Dualband L1/L5 GNSS Breakout - DAN-F10N WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov

  • 1x SparkFun Dualband L1/L5 GNSS Breakout - DAN-F10N
  • 40.6 x 40.6 mm (1.60 x 1.60")

Scale Image of SparkFun Dualband L1/L5 GNSS Breakout - Dimensions

  • Concurrent signal reception: 5 + QZSS
  • GNSS constellations: GPS, Galileo, BDS, QZSS, NavIC
  • SBAS systems: WASS, EGNOS, BDSBAS, MSAS, GAGAN, KASS, SouthPAN
  • Built-in NIC anti-jamming unit
  • Connections: 14 PTH pins, 1x UART, USB-C connector, 6 PTH pins (BlueSMiRF/Serial-to-UART)
  • LEDs: PWR - Red 3.3V power indicator, PPS - Green PPS signal indicator
  • Sensitivity: Tracking & Navigation: -164dBm, Reacquisition: -156dBm, Cold start: -145dBm, Hot start: -156dBm
  • Update rate: Up to 10Hz
  • Horizontal position accuracy: 1.0m CEP (with SBAS), 1.5m CEP (without SBAS)
  • Acquisition: Cold start: 28s, Aided start: 2s, Reacquisition: 2s
  • Communication protocol: NMEA, UBX binary, RTCM v3.4, SPARTN v2.0.2
  • Security: RF interference and jamming detection/reporting, Spoofing detection/reporting, Secure boot for firmware integrity
  • Power supply: 2.7V to 3.6V, Backup supply: 1.65V to 3.6V, Power consumption: 63 mW (continuous tracking, 3V)
  • Temperature range: -40°C to +85°C
  • Package: 56-pin LCC package

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like