Waveshare ESP32-C3 Mini Dev Board, Based on ESP32-C3FN4, 160MHz, 2.4GHz Wi-Fi & Bluetooth 5 (w/ Headers)
Compact ESP32-C3 board with RISC-V processor
Supports 2.4GHz Wi-Fi and Bluetooth 5
Includes USB Type-C, BOOT/RESET buttons
Features 400KB SRAM, 384KB ROM, 4MB Flash
Designed for direct soldering with ceramic antenna
The Waveshare ESP32-C3 Mini Dev Board, Based on ESP32-C3FN4, 160MHz, 2.4GHz Wi-Fi & Bluetooth 5 (w/ Headers) is a compact development board featuring a RISC-V 32-bit single-core processor. It operates at a frequency of up to 160MHz and supports 2.4GHz Wi-Fi and Bluetooth 5, making it suitable for a variety of wireless applications.
This board includes 400KB of SRAM, 384KB of ROM, and 4MB of onboard Flash memory. It is designed with a castellated module and a ceramic antenna, allowing for direct soldering to carrier boards. The board supports flexible power management and includes a USB Type-C port, BOOT and RESET buttons, and a WS2812 RGB LED for enhanced functionality.
1x Waveshare ESP32-C3 Mini Dev Board, Based on ESP32-C3FN4, 160MHz, 2.4GHz Wi-Fi & Bluetooth 5 (w/ Headers)
Low-power SoC with RISC-V 32-bit single-core processor, up to 160MHz
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)
400KB of SRAM, 384KB ROM, and 4MB of onboard Flash memory
Castellated module and onboard ceramic antenna for direct soldering to carrier boards
Supports flexible clock and independent module power supply settings for low power consumption
Integrated USB serial port full-speed controller
15 GPIO pins for flexible pin function configuration
Includes 3 SPI, 1 I2C, 2 UART, 1 I2S, and 2 ADC interfaces
USB Type-C port
BOOT button
RESET button
WS2812 RGB LED
ME6217C33M5G low dropout regulator with 800mA maximum output
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
United Kingdom consumers exercising their statutory Right of Cancellation are subject to different conditions. See the Statutory Right of Cancellation.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorisation (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A £100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tyres, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odour-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfil a customer request.
* United-Kingdom consumers retain their statutory Right of Cancellation on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Cancellation, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorisation (RA)
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".